Silk'n Titan Skin Tightening and Lifting

Worried about aging?

Fibroblasts are cells in our body that produce collagen and elastin, the building blocks of the skin. Young skin is able to renew its fibroblasts every 21 to 28 days, but as we get older this process only occurs every 40 to 45 days. After the age of 50, the body produces fewer and fewer fibroblasts, resulting in visibly aged skin.

Here’s the solution.

Titan anti-aging skin technology stimulates cell renewal, making slack skin tight and supple again.* Titan harmonizes the benefits of three sources of energy: Bi-Polar RF energy, LED light energy and IR heat energy. The powerful combination of these three energy sources creates a safe, painless result.*

If you were looking at a cross-section of older skin, you would see certain cells are damaged. The Titan technology penetrates the skin, seeks out the damaged tissue and strengthens it*.

The warmth exuded by the device helps to stimulate the skin's renewing properties. On the outside, the skin may appear visibly radiant after each treatment. 

Want to hear from real users about their Titan experiences? Check out our Testimonials page.

* Results may vary based on skin type and degree of laxity in skin.

Before & Afters

Before

After

Before

After

How to use your Titan

Silk’n Titan is easy to use. A treatment takes only a few minutes of your time. Be sure to follow our treatment plan to get the best results.

New to using the Silk’n Titan? Here’s what we recommend.

Treatment schedule

• Treat each area separately for 10 to 15 minutes.
• You can treat as many areas as you like in one session; it's up to you.

Maintenance regime

• To maintain your results, you should use Titan for two sessions a week for 10 weeks.
• After that, treat once every two weeks to maintain results.

Using the device

Follow the recommended order in the user guide and treat each zone for 10 to 15 minutes by holding the device against your skin. It is important that you treat each area individually, one small area of your face at a time. By doing this, the temperature on your skin remains constant. Don’t forget to include your neck and jawline in the treatment.

Silk’n Slider Gel

Silk’n Titan comes with a tube of Silk’n Slider Gel. This gel is required to carry out your treatments. It is important that you apply a thin layer of gel to your skin before you start treatment.

Without the gel, the device will not work. The water-based product not only moisturizes but also helps to guide the device. It ensures that Silk’n Titan moves easily over your skin and prevents it from overheating and reddening.

Be sure to add Slider Gel to your shopping cart when you order the Titan.

Wrinkle and skin treatment areas

1. Forehead (including in between brows)
2. Right Cheek (including around eyes)
3. Left Cheek (including around the eyes)
4. Right Lower Cheek (including nasolabial fold, or, laugh lines around the mouth, and jawline)
5. Left Lower Cheek (including nasolabial fold and jawline)
6. Neck – Treat here for smoothing

Anti-aging treatment steps

1. Remove all jewelry.
2. Press the start button to turn on the device. The level 1 energy level indicator light will go on.
3. For your first treatment, start at energy level 1 for a few minutes, then set an energy level that is comfortable for the area you wish to treat. For future treatments, you can use an energy level that is comfortable for the area you wish to treat.
4. Next, spread a thin layer of Silk'n Slider Gel over the area. Always apply Slider Gel (or another clear, water-based gel) before you put the device on your skin.
5. Press the treatment surface firmly against your skin. You will feel a mild sensation of warmth. Move the device in gentle, massage-like linear motions on the area you wish to treat. Progress slowly and carefully. Work each treatment area for 10 to 15 minutes. Make sure the treatment surface is in good contact with your skin.
6. Immediately after the treatment, wash your face to remove any gel, then apply facial lotion or a mask.

You can expect to see visible results after multiple treatments and fuller results after completing full treatment regime.* To learn more, visit our FAQs tab.

 * Results may vary based on skin type and degree of laxity in skin.

What is Silk’n Titan?

Silk’n Titan is an anti-aging skin care device that works with HT (Home Tightening) technology to reduce wrinkles and tighten the skin.* It strengthens the skin’s own collagen, elastin fibers, and its deeper layers from the inside out*.

*Results may vary based on skin type and degree of laxity in skin.

How does it work?

Titan technology uses 3 energies to help rejuvenate the skin from the inside. The warmth exuded by the device helps to stimulate the skin's renewing properties. On the outside, the skin may appear visibly radiant after each treatment. 

When will my skin look younger?

Visible results, diminished wrinkles and reduced pore size may be seen after multiple treatments*. Best skin rejuvenation can be seen after full treatment*.

*Results may vary based on skin type and degree of laxity in skin.

Is it suitable for everyone? Anti-aging for men?

The Titan is suitable for both women and men and for all skin types and all skin colors.  For any medical health enquiries, please read the contraindication section in the user manual before you start your treatments.

What areas of my face can I use the Titan?

It can be used on the forehead, cheeks, upper lip, chin, jawline, neck and around the eyes. For advice on which anti-aging areas to target, visit our How to Use page.

Is it safe?

The Silk’n Titan has been Health Canada cleared. Always read the manual carefully before using Titan.

Does the treatment hurt?

No. You will only feel a mild sensation of warmth during your treatment. You may also experience some very mild pink-like coloration of the skin during and just after the treatment, which will gradually fade within a few hours.

How should I use Silk’n Titan?

For your first treatment, determine which Titan energy level is right for you. Spread a thin layer of Slider Gel (included) over the area you intend to treat. Start at energy level 1 and raise the energy level gradually to find the highest energy level that you are still comfortable with. Move the device in linear motions, back and forth and treat each facial area separately.

What does the thermal sensor do?

This built-in heat stabilizer measures the temperature of your skin during treatment. If the thermal sensor measures a temperature above 42°C to 43°C, the device will stop emitting heat automatically. Once the skin has cooled down sufficiently, the treatment will resume. This mechanism ensures that your skin never becomes overheated.

How long does a treatment take?

The total treatment time for one single treatment area takes 10 to 15 minutes. Start at a low energy level. After that, you can gradually raise it to the energy level you are still comfortable with. It is important that you treat each area individually, one small area of your face at a time. This way the temperature on your skin remains constant.

For full details on our recommended treatment schedule, visit our How to Use page.

How often should I use it?

To give your skin a more intensive treatment, you should use the Silk'n Titan twice a week, for 10 weeks. Maintain skin care results by treating wrinkles and fine lines once every two weeks. 

When can I expect results?

Visible reduction in wrinkles and skin tightening results are normally seen after multiple treatments. Best results can be seen after full treatment is completed. Keep in mind that results will depend on how consistent the treatment regimen is followed and can vary from person to person.

Why should I apply Slider Gel before each treatment?

The Slider Gel acts as a conductor: it is required to emit the energy deep beneath the skin.

Can I use any other type of gel?

If you decide to use another type of gel other than Silk'n Slider Gel, it is important that it's a basic gel that is transparent and water-based. Only when you follow these criteria will the Titan device work optimally.

Should I do anything after treatment?

After treatment, you should gently wipe the gel residue off your skin, using hand drying napkins or a towel. You can also wash your face with some cleansing lotion and water. We recommend you also use a moisturizer to soothe the skin.

Can I sunbathe?

Yes, you can use the Titan while enjoying the outdoors and sun, although it is always a good idea to use protection when exposed to the sun to maintain youthful skin!

Is there any recovery time?

Silk’n Titan uses gentle energy that may cause some mild redness immediately after treatment. This will subside within a few hours of treating.

At what age can it be used?

This device is suitable from the age of 18 and up. Please note: this device does not have a preventive effect. This device works best on visibly mature skin.

Am I allowed to use this device when I am pregnant or nursing?

No, you are not allowed to use this device when you are pregnant or nursing.

Should I use eye protection when using the Silk’n Titan?

No, you don’t need to wear eye protection when using the Silk’n Titan.

Can I use Titan with my FaceFX device?

The FaceFX gives you skin photo-rejuvenation treatment.  With 3X red light energy, it works to help treat fine lines and improve overall skin texture and tone*.  Your skin will have a beautiful youthful glow.

While the Titan also has red light energy, its primary energy is RF (radio frequency) which will penetrate 4mm beneath the skin vs. three to four with just red light alone. The RF energy will help to contract your connective tissue giving you a tightening and lifting effect. It will also help to soften deeper wrinkles*.

To treat with both devices and get the ultimate results, we recommend initially you use them on alternate days.  Once you have progressed to the maintenance schedule of treatments, alternate device weekly (week 1, FaceFX; week 2, Titan).

*Results may vary based on skin type and degree of laxity in skin.

How do I clean my device?

To clean your Silk’n Titan device, use a clean cloth or absorbent tissue to wipe the gel residue off the treatment surface. Always unplug your Titan device prior to cleaning. Never immerse Titan or any of its parts in water.